Specfications of Encapsulated Fumaric Acid

-

 

Specfications of Encapsulated Fumaric Acid

Assay of Fumaric Acid: 80-85%

Appearance: White free-flowing granules

Particle Size: 100% thru US 25 mesh

Percentage of Hydrogenated Vegetable Oil Coating: 15-20%

Lead: Not more than 2 mg/kg.

Maleic Acid: Not more than 0.1%.

Residue on Ignition: Not more than 0.1%.

Water: Not more than 0.5%.

Encapsulated Fumaric Acid is a white powder made by spraying hydrogenated vegetable oil over the acid. Fumaric acid is used in tortilla applications where a low pH is desired. Hydrogenated vegetable oil encapsulated fumaric acid is designed to give you greater control over the production process, quality and cost of bread and tortilla. It kick-start leavening during mixing, and regulate pH during baking. Encapsulation ensures that yeast development is not inhibited by the presence of active acid during the proofing process, which decreases the amount of yeast required. Controlled release of the fumaric acid during baking lowers the pH at just the right time to improve the performance of the preservative calcium propionate. Fumaric acid has E number E 297 used in beverages and baking powders.



Quality Standard:

ItemIndex
Senseswhite particles or powder
Mesh Number30mesh ,98% Can pass.
Fumaric Acid Content , w/%85±3%
Moisture≤5%
Sulfate≤0.1
Residue on ignition≤0.05
Maleic acid≤0.005
Lead (Pb),mg/kg≤2.0
Total arsenic (As),mg/kg≤2.0


Low effective cost – Fumaric Acid is the strongest food acidulant

No moisture absorption – Fumaric Acid is non-hygroscopic

Laminated texture – Fumaric Acid acts as a leavening agent

Increases production – Fumaric Acid improves machinability in wheat flour tortillas, similar to sulfites

Extends shelf life – Fumaric Acid works synergistically with antimicrobials

Use rate

Typically used at between 0.1 to 0.2 lbs per 100 lbs flour (0.1 to 0.2 bakers percent). 


Use enough to lower pH of the final tortilla to 5.8 – 6.2.  Usage depends on external factors like alkalinity of water used, other ingredients used and type of flour.


Blend with flour and other dry ingredients at the beginning of the mixing process to achieve complete and uniform dispersion throughout the dough.

Comments

Post a Comment

Popular posts from this blog

Malic Acid Coated with Sodium Maleate|Coated malic acid

-
  1.  Malic Acid Coated with Sodium Maleate|Coated malic acid  Product   Description: Megafood coated malic acids are acid regulators with different particle sizes. It takes malic acid as the main raw material, adopting the original patented technology and equipment, be coated by different materials upon application. It can be widely used in food and medicine as acid regulator, preservatives and anti-sticking agent. It also releases flavor in a mild and long-lasting way and has very good anti-sticking effect .   2.  Application   fields: Gummy candy, effervescent tablets, powder drinks, flavors and seasonings, etc. 3.  Product: Product code Mesh Ingredients   MF-8502MN 25-80 US mesh (95%pass)   DL-malic acid(E296) , sodium malate（E350i）. Quality standards： Appearance Light ye...
Read more

Encapsulated Sorbic Acid Manufacturers, with TDS

-
Image
 Encapsulated Sorbic Acid is a white powder made by spraying hydrogenated vegetable oil over the acid, that allows the sorbic acid to react in two stages. First stage in the bowl and second stage is released in the baking process. This improves the effectiveness of its preserving qualities to extend shelf life. Sorbic acid has E number of E 200 used in beverages and baking powders as a food preservative. Encapsulated sorbic acid is designed to give you greater control over the production process, quality and cost of bread and tortilla. Encapsulation ensures that yeast development is not inhibited by the presence of active acid during the proofing process, which decreases the amount of yeast required. Controlled release of the sorbic acid during baking lowers the pH at just the right time to improve the performance of the preservative. Specfications of Encapsulated Sorbic Acid: Assay of Sorbic Acid: 80-85% Percentage of Hydrogenated Vegetable Oil Coating: 15-20% Lead: Not more than ...
Read more

Micro Encapsulated Lactic Acid Manufacturers, with TDS

-
Image
 Lactic Acid coated with hydrogenated palm oil or hydrogenated soybean oil will have a sharp release at say 55-60C (about 130-140F) or say 65-70C (about 150-160F). This can be called temperature based release. It is used in food production. For Encapsulated Lactic Acid, we use Lactic Acid Powder of 60% assay with Calcium Lactate. It's granules are coated with Hydrogenated Vegetable Oil or Mono and Diglycerides. Specfications of Encapsulated Lactic Acid: Assay of Fumaric Acid: about 50% Calcium Lactate: about 30% Coating: about 20% or as required. Percentage of Hydrogenated Vegetable Oil Coating: 15-20% Lead: Not more than 2 mg/kg. Maleic Acid: Not more than 0.1%. Residue on Ignition: Not more than 0.1%. Water: Not more than 0.5%. We also manufacture and supply as under: Micro-Encapsulated Calcium Butyrate Lactic Acid Micro Encapsulated Lactic Acid Micro Encapsulated Citric Acid Micro Encapsultted Copper Gluconate Micro Encapsulated Gel Breaker Micro Encapsulated Fumaric Acid Micro ...
Read more